Mitsubishi Quick Tips – GT16 Series HMI Video Playback

Mitsubishi Electric’s Quick Tips series offers concise solutions to common challenges in industrial automation. From ladder diagram troubleshooting to servo amplifier display insights, these guides are invaluable for engineers and technicians seeking efficiency and reliability. Below is a detailed overview of these tips.

---

---

---

1. Yellow Highlighted Ladder in Mitsubishi PLC

Discover the significance of yellow highlighting in ladder diagrams and how to address it effectively.

Key Points:

• Cause: Indicates conditional logic discrepancies or undefined variables.
• Solution: Check for mismatched or missing elements in the program logic.
• Preventive Tip: Use simulation mode to identify and resolve issues early.

---

2. Q, L Connection with Built-in Ethernet

Set up Ethernet communication between Mitsubishi Q and L series PLCs seamlessly.

Steps:

• Enable Ethernet: Access the PLC’s network settings in GX Works3.
• Assign IP: Ensure each PLC has a unique IP address.
• Test Connection: Use a ping command to verify communication.

---

3. Q, L and FX3G USB Driver Installation

Learn how to install USB drivers for Mitsubishi Q, L, and FX3G series PLCs to ensure smooth programming connections.

Steps:

• Download Drivers: Obtain the latest drivers from Mitsubishi Electric’s official site.
• Install: Follow the step-by-step installation wizard.
• Verify: Check the device manager to confirm successful installation.

---

4. Q Series Motion Controller OS Installation

Install and update the operating system for Mitsubishi Q series motion controllers efficiently.

Key Steps:

• Backup Data: Save existing configurations before proceeding.
• Install OS: Use the GX Works software for a guided installation process.
• Verify: Test the motion controller with a sample program post-installation.

---

5. PLC Compile Build Troubleshooting

Resolve errors during the compile/build process in GX Works3.

Common Issues:

• Syntax Errors: Ensure all variables and instructions are correctly defined.
• Missing Modules: Verify all modules are correctly configured in the project.
• Action Plan: Use the error log for detailed guidance on corrections.

---

6. MR-J3 Servo Amplifier Display Overview

Decode the MR-J3 Servo Amplifier display and understand error codes.

Key Points:

• Status Codes: Learn what each display code indicates, from normal operation to alarms.
• Troubleshooting: Use the manual to address specific error codes.
• Regular Maintenance: Perform periodic inspections to minimize errors.

---

7. Memory Sharing Between Multiple CPUs

Optimize memory allocation when using multiple CPUs in Mitsubishi PLCs.

Steps:

• Assign Areas: Allocate specific memory regions to each CPU.
• Set Priorities: Define priority levels for tasks to avoid conflicts.
• Test: Monitor performance during runtime for any lag or errors.

---

8. Jogging a Motor with the FR PU07

Master motor jogging operations using the FR PU07.

Steps:

• Access Menu: Navigate to the jog operation settings in the PU07.
• Set Speed: Define the desired jog speed and direction.
• Test Run: Execute the jog operation and observe motor movement.

---

9. GT16 Series HMI Video Playback

Enable video playback functionality on Mitsubishi GT16 Series HMIs.

Steps:

• Upload Videos: Transfer video files to the HMI via USB or Ethernet.
• Set Playback Parameters: Adjust screen resolution and playback speed.
• Test: Play videos directly on the HMI to ensure compatibility.

---

10. GT10 OS Install Communication Drivers

Install and configure communication drivers for the GT10 HMI.

Steps:

• Download Drivers: Use Mitsubishi’s support site for compatible drivers.
• Install via USB: Transfer drivers to the HMI and initiate installation.
• Test Connection: Ensure the HMI communicates effectively with connected devices.

---

11. GOT Ethernet Connection to Mitsubishi PLC

Connect GOT HMIs to Mitsubishi PLCs over Ethernet effortlessly.

Steps:

• Assign IPs: Configure unique IP addresses for the HMI and PLC.
• Set Communication Protocol: Select Mitsubishi Ethernet protocol in both devices.
• Verify: Test communication by running a sample program.

---

---

12. FX USB Drivers Installation

Install USB drivers for FX series PLCs to enable programming and monitoring.

Steps:

• Download and Install: Obtain the driver package and follow the setup wizard.
• Connect: Plug in the USB cable and check for device recognition.
• Test: Open GX Works3 and establish a connection.

13. FX USB Connection (Serial)

Configure serial USB connections for FX series PLCs for reliable communication.

Steps:

• Install Drivers: Ensure the necessary drivers are pre-installed.
• Select Port: Set the correct COM port in GX Works3.
• Test Connection: Verify by uploading or downloading a test program.